• Customer Care: Toll Free - 1860 233 9999
  • Sites:

Optic Fiber Connectors

Connectors

An Optic fiber Connector terminates the end of an optic fiber cable and enables quicker conenction and disconnection.

The connectors mechanically couple and align the cores of fibers so that light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers.

A variety of optical fiber connectors are available, but SC and LC connectors are the most common types of connectors on the market. Typical connectors are rated for 500–1,000 mating cycles.The main differences among types of connectors are dimensions and methods of mechanical coupling.Different connectors are required for for multimode, and for single-mode fibers.


Additional Info

  • High Precision Ceramic Ferrule
  • High Precision Polymer housing
  • Simplex or Duplex
  • High Precision Nickel plated brass housing
  • APC Green Polymer housing with 900μm and 3mm strain relief boot
  • Low Insertion Loss
  • Low Return Loss
  • Ease of installation
  • Low cost
  • Reliability
  • Low environmental sensitivity
  • Ease of use
FC connectors
Measure : FC Connector
Insertion Loss dB (Single and Multi Mode) : < 0.3  Single mode and Multi mode
Return Loss : > 55dB UPC Style Ferrule     > 60dB APC Style Ferrule
Pigtail Boot : 900μm black (Multi mode)  blue(Single mode)
Cable Boot : 3mm black (Multi mode),  blue (Single mode)  2mm upon request
Mating Cycle : Up to 1000 times
Ferrule Diameter : 2.5mm ± 0.001
Ferrule Tolerance Single Mode : 126 ± 0.5μm internal
Ferrule Tolerance Multi Mode : 127 ± 0.5μm internal
Finish : Pre-radiused PC end, radius 10 to 25mm
Operating Temperture : - 40°C to + 85 °C
Meet standard : IEC61754-20 Optical Fibre Connector Interface
Durability : IEC61300-2-2 Fibre Optic Interconnecting Devices
Performance : IEC61753-1 Optical Fibre interconnecting devices and passive components performance standard

LC connectors
Measure : LC Connector
Insertion Loss dB (Single and Multi Mode) : < 0.3
Return Loss : > 55dB UPC Style Ferrule     > 60dB APC Style Ferrule
Cable Boot : 2mm white, 3mm upon request
Mating Cycle : Up to 1000 times
Ferrule Diameter : 1.25mm ± 0.001
Ferrule Tolerance Single Mode : 126 ± 0.5μm internal
Ferrule Tolerance Multi Mode : 127 ± 0.5μm internal
Finish : Pre-radiused PC end, radius 10 to 25mm
Operating Temperture : - 40°C to + 85 °C
Meet standard : IEC61754-20 Optical Fibre Connector Interface
Durability : IEC61300-2-2 Fibre Optic Interconnecting Devices
Performance : IEC61753-1 Optical Fibre interconnecting devices and passive components performance standard

ST connectors
Measure : ST Connector
Insertion Loss dB (Single and Multi Mode) : < 0.3
Return Loss : > 50dB UPC Style Ferrule
Pigtail Boot : 900μm black (MM) yellow (SM)
Cable Boot : 3mm black, 2mm upon request
Mating Cycle : Up to 1000 times
Ferrule Diameter : 2.5mm ± 0.001
Ferrule Tolerance Single Mode : 126 ± 0.5μm internal
Ferrule Tolerance Multi Mode : 127 ± 0.5μm internal
Finish : Pre-radiused PC end, radius 10 to 25mm
Operating Temperture : - 40°C to + 85 °C
Meet standard : IEC61754-20 Optical Fibre Connector Interface
Durability : IEC61300-2-2 Fibre Optic Interconnecting Devices
Performance : IEC61753-1 Optical Fibre interconnecting devices and passive components performance standard

SC connector
Measure : SC Connector
Insertion Loss dB (Single and Multi Mode) : < 0.3
Return Loss : > 50dB UPC Style Ferrule     > 60dB APC Style Ferrule
Pigtail Boot : 900μm beige (Multi mode)  blue(Single mode)
Cable Boot : 3mm beige (Multi mode),  blue (Single mode)  2mm upon request
Mating Cycle : Up to 1000 times
Ferrule Diameter : 2.5mm ± 0.001
Ferrule Tolerance Single Mode : 126 ± 0.5μm internal
Ferrule Tolerance Multi Mode : 127 ± 0.5μm internal
Finish : Pre-radiused PC end, radius 10 to 25mm
Operating Temperture : - 40°C to + 85 °C
Meet standard : IEC61754-20 Optical Fibre Connector Interface
Durability : IEC61300-2-2 Fibre Optic Interconnecting Devices
Performance : IEC61753-1 Optical Fibre interconnecting devices and passive components performance standard
You are here: