• Customer Care: Toll Free - 1860 233 9999
  • Sites:

Optic Fiber Patch Cord

Patch CordsOptic Fiber Patch Cord

D-Link patch cords are available with full standard optical specifications, precise length tolerances. All assemblies are 100% inspected for optical characteristics and fiber end face finish.

The optical fiber patch cords are suitable for data communication, telecommunication applications. The terminated connectors in assemblies are designed to and are compatible with industry standards (EIA/TIA, IEC, ANSI, NTT and Telcordia). D-Link can deliver customized patch cords as per requirement .


Additional Info

  • Adopts high precision ceramic ferrule with good concentricity
  • Good geometrical characteristics of apex offset & radius of curvature & fiber height
  • Compact & strong crimping offers exceptional tensile strength in cable assemblies
  • 100% inspected for optical characteristics & fiber endface finish
  • Low insertion loss & return loss, clean and scratch-free end faces
  • Good performance endurance under changing circumstances
Connector Type SC / ST / FC / LC / MTRJ
Optical Fiber Corning single-mode G652D,G657A,G657B
Cable Type PVC  &  LSZH on request
0.9mm/2.0mm/3.0mm Simplex & duplex
Cable Color, Length Yellow for simplex  & Orange for Multi-mode & Aqua for OM3
1m , 2m & 3m .Other lengths on request
Optical Specification
Insertion Loss
Typical ≤0.2dB, Max. 0.3dB
MTRJ Max. 0.5dB
Return Loss >PC≥45dB, UPC≥50 dB, APC≥60dB
Mechanical Specification
Connector Ferrule Ceramic, (MTRJ: PS- Polyphenylene Sulphide )
Apex Offset <50um
Fiber Height ±100nm
End-face Radius of Curvature 7mm < R < 25mm (Excluding MTRJ)
Repeatability ≤0.2dB   1,000 times mating cycles
Working Temperature -40℃ ~+ 85℃
Storage Temperature -40℃~ +85℃
You are here: